|
|---|
la recherche du bon emploi |
|
|---|
|
|
|---|
la recherche du bon emploi |
|
|
|---|
|
|
|
|
|
|
|---|
HOME PAGE |
|---|
CHERCHER UN CV |
GUIDE |
NOS SERVICES |
COACHING EMPLOI |
WEB-TV |
 Plusieurs offres d'emploi en Finland1-Mechanical Engineers / Supervisors, 3 paikkaa, Tekniq Oy, Vaasa: -Job Duties: - Evaluation of the Mechanical design, correction etc. - Installation Supervision, advising mechanical systems; piping, welding, supporting, steel structures, units, etc. their mechanical functioning - Testing the systems according to installation instructions and manufacturer's guidance. - Like flushing supervision, pressure tests, commissioning. - Reporting weekly to Section Manager/ Site Manager / Project Manager depending on the project organization. - Attending to meetings, briefing, planning, project meetings, safety meetings. - Following the safety rules of the installation, reporting if any risks. - Complete the project and given tasks - Maintaining professional and technical knowledge by following the development of the mechanical engineering. - Contributes to team effort by accomplishing related results as needed. -Mechanical Engineer Skills and Qualifications: - Engineering graduation - Min. 5 years installation experience - Knowledge of; mechanical systems, troubleshooting, testing, mechanical quality focus, analyzing information, reporting skills, team leading and negotiation skills. 2-Junior Automation and Instrumentation Engineers, 3 paikkaa, Tekniq Oy, Vaasa: -Job duties: - Plant automation and instrumentation testing and commissioning. - Performing installation supervision and commissioning works of various equipment's. - Troubleshooting and identifying failures, tuning and testing of installations according to instructions. - Continuous reporting to relevant stakeholders during the project. - Participate to meetings. -Skills and qualifications: - B.Sc. or M.Sc. in Engineering or studies still going on. - Experience of boiler plant electrical, instrumentation and automation systems. - Knowledge and experience of various PLC automation systems is an advantage. - Comprehensive ICT skills. - Some experience in the field. - Team player with a positive mind-set. - Self-driven attitude. - Good written and spoken English. - Technical problem-solving skills. - Willingness to travel 3-Pipewelders and Pipefitters, Barona Oy, Barona Teollisuus Oy, Raisio Are you an experienced pipewelder or pipefitter interested in a new work opportunity Then our job offer might be exactly what you are looking for. Our client in Naantali, Turku is searching for welders and fitters to complete its team. We are looking for both - pipewelders and pipefitters to assemble, weld, and maintain piping systems with high precision. You will be working indoor, on the factory site. Your main tasks will include welding/ fitting prefabricated piping elements. For welders, experience with welding turntable is needed. The factory works in 2 shifts and offers at least 40 hours/ week. Work starts as soon as we find suitable candidates. As a welder, we expect you to have: -MIG/MAG or TIG welding background of at least 3 years -Experience with welding turntable -Experience with reading welding markings -Valid welding certificate for pipes is an advantage -Ability to work independently and in the team -English or Russian or Finnish language on communicative level (B1) As a fitter, we expect from you the following: -Experience in this field for at least 3 years -Experience with reading piping isometrics -Ability to work independently and precisely -English or Russian or Finnish language on communicative level (B1) We offer: -Long-term employment -Competitive pay -Development opportunities in a friendly and cooperative environment -Accommodation, if needed -Assistance in English or Russian languages 4-Senior Advisor in health technology. Are you interested in working with ICT development, research and higher education in a multidisciplinary workplace? Are you a steely health technology professional who is excited about research and development operations taking place in the interface between higher education and working life Would you also like to teach and guide our students in your area of special expertise? If your answer is yes, this position might be for you. Your work as Senior Advisor in health technology involves research and development activities and working life collaboration in the field of health technology. In addition, you will get to apply your expertise in cooperation with the research in other fields. What do we expect from you? - An applicable higher education degree is required. An advanced degree is further appreciated. - We appreciate solid experience of software development related to health technology. - Data analytics skills are also appreciated. - Interest in machine learning and other areas of AI is valued. - We also value skills and interest in guiding our students. - We appreciate deep understanding of the cyber security challenges concerning health technology. - In addition, we value business life experience from tasks in which you have applied your expertise in research and development operations. - A definite requirement for the role is the capability to act in English in all your work assignments. - Command of programming either in general or field-specifically. What do we offer? The ICT unit at Turku University of Applied Sciences offers you a brilliant position in the interface of higher education and business life. With us, you will get an opportunity to work in a great work community in which we share information and experiences and collaborate multiprofessionally with our colleagues. You will get to participate in our research and development activities. In addition, you will get to develop your own expertise towards the very top of your field, as we design a professional development path for each of our staff members. The position is permanent, with a probationary period of 6 months applied. 5-PRODUCT DESIGNER At Lyyti, the customer comes first, and this is a rule we live by in all our activities. To offer an intuitive, modern and easy-to-use SaaS product, we develop our software continuously. Our Product Team consists of Developers, Designers, and Product Managers with a common goal of creating the best SaaS-platform for sales and marketing events. With the average NPS of 70, we know that our customers love our product as much as we do. Now we're looking for a Product Designer to strengthen our Design Team. Your key responsibilities are Designing, building and iterating Lyyti's mobile apps Continuing constructing and scaling our design system with the help of other Designers and Developers Directly interacting with our customers to validate your design solutions Delivering an outstanding, end-to-end user experience for all our customers As a Designer, you should have Proven experience in all phases of the design process including user research, copywriting, wireframing, prototyping, visual design, interaction design, and usability testing Passion about the entire product discovery process, conducting UX research and customer interviews, as well as collaborating closely with Product Managers to define the future of our product Understanding of iOS and Android design principles Experience in design tools such as Adobe XD, Sketch, Figma etc. Ability to collaborate with cross-functional team members proactively Fluency in English It would also be great if you have at least a basic understanding of front end development (no coding skills required) What we offer you A wide variety of different challenges to solve - an excellent opportunity to grow as a designer You will have a significant personal impact on our product Awesome colleagues and the chance to be part of the international Lyyti Family Modern tools and working environment Benefits like exercise and culture benefits, remote working opportunities, personal health insurance etc. 6-Chief Design Engineer, Process, Citec Oy Ab, Vaasa As a Process Engineering Chief Design Engineer, you would both lead and execute the process engineering scope in our multi-discipline projects, especially concentrating on mining and mineral or power plant engineering projects. In addition, you would be part of our sales process, giving technical support to the sales work towards our existing and potential customers. Your daily work would also include active communication with other disciplines and customers. We want to offer you an interesting and responsible position in our domestic and international projects, a flexible working environment, and the possibility to work with skilled colleagues in a friendly and open atmosphere. We offer you: An independent and wide role as technical expert and sub-project manager in international projects A network of skilled colleagues The possibility to develop new solutions and customer relationships through your technical competences Career possibilities within an international organization A flexible and agile working community Main tasks: Process engineering (e.g. piping and instrumentation diagrams, flow diagrams, process calculations, equipment specifications, process descriptions) Leading the process engineering in our multidiscipline projects Acting as the projects' main contact towards our customers for the process engineering scope Developing technically efficient engineering solutions and offering technical sales support 7- Chief Design Engineer, Electrical, Citec Oy Ab, Vaasa As a Chief Design Engineer, you are in charge for the technical project management and engineering of the Electrical and automation Design. In this role you would have a key role towards Citec's design team, other disciplines within the project and towards the customer. You are supporting sales projects, continuing with operative projects and leading your discipline from the concept, basic & extended basic and are coordinating and controlling the detail engineering for green field as well as brown field projects in international power plants and other Process plants. We offer you: - Independent and wide role as technical expert and as project manager for own discipline - Possibility to further develop your competence and technical solutions together with internal experts and with our valued customers - Career possibilities according to your own ambition towards for example project manager role Qualifications: - B.Sc. or M.Sc. in Electrical / Automation Engineering - Previous experience in Electrical / Automation design in industrial engineering projects - Deep knowledge and understanding of Plant & Process electrification, power generation and distribution systems in power and industrial process plant area. - Experience in modern 3D design tools - Good communication skills in English. Finnish and/or Swedish is considered as advantage 8-Chief Design Engineer to our office in Espoo, Turku or Vaasa. As a Process Engineering Chief Design Engineer, you would both lead and execute the process engineering scope in our multi-discipline projects, especially concentrating on mining and mineral or power plant engineering projects. In addition, you would be part of our sales process, giving technical support to the sales work towards our existing and potential customers. Your daily work would also include active communication with other disciplines and customers. We want to offer you an interesting and responsible position in our domestic and international projects, a flexible working environment, and the possibility to work with skilled colleagues in a friendly and open atmosphere. We offer you: An independent and wide role as technical expert and sub-project manager in international projects A network of skilled colleagues The possibility to develop new solutions and customer relationships through your technical competences Career possibilities within an international organization A flexible and agile working community Main tasks: Process engineering (e.g. piping and instrumentation diagrams, flow diagrams, process calculations, equipment specifications, process descriptions) Leading the process engineering in our multidiscipline projects Acting as the projects? main contact towards our customers for the process engineering scope Developing technically efficient engineering solutions and offering technical sales support We expect: M.Sc. or B.Sc. in process, mechanical or similar engineering Experience in process engineering for at least 3 years Good communication skills in English. Previous experience in mining and minerals or power plant engineering projects is seen as an advantage. 9- 20 NEW TECHNICAL DOCUMENTATION & DIGITAL SOLUTIONS FUTURE SPECIALISTS The positions are located in our Citec offices in Finland - Vaasa, Turku, Espoo, Tampere, Oulu or Pietarsaari. DOCUMENTATION MANAGEMENT POSITIONS Document Controller/Documentation Engineer We are looking for different profiles to complement our teams, no specific previous experience or education is required. We will give you induction to the tasks and tools as needed. A proactive teamworking attitude and an interest in making a career in handling documentation is what we are looking for! As a Document Controller or Documentation Engineer, you handle documentation and the main tasks are: verifying document contents, versions, type and location, ensuring metadata quality, sending and receiving documentation, establishing and following up required documentation and supporting in document handling. CONTENT CREATION POSITIONS Technical Documentation Specialist As a Technical Documentation Specialist, you can work with various tasks technical writing, information design, information architecture, visual design. We are looking for persons already having experience in technical documentation field with the above-mentioned tasks, but we are also interested in getting applications from persons who are taking their first steps in this area. In these roles you for example design, create and publish technical user documentation (e.g., operation manuals, maintenance manuals, user manuals) according to customer and end-user needs following the standards and guidelines. You will also be working with development activities related to our content creation services, documentation tools, processes and ways of working with others. For more information, please contact Head of Content Creation Sari Leinonen +358 504283 886 on March 3rd between 9-12 EET. LIFECYCLE MANAGEMENT POSITIONS Master Data Engineer As Master Data Engineer, you are working with lifecycle solutions with focus on data management, spare part - & maintenance information. Different PDM & PLM systems is your main working environment - with input from engineering and supplier?s documentation, you will enrich the data quality in the systems. You will have daily communication with our customer contacts and other Citec project teams. Main tasks: collect and publish master data, and coordination with external and internal stakeholders. Master Data Specialist As Master Data Specialist, you are working with lifecycle solutions with focus on data management, spare part - & maintenance information. We are expecting that you have +5 years of experiences of developing Lifecycle solutions, PDM & PLM systems and other IT solutions is your expertise area. For more information, kindly contact Head of Lifecycle Management Robin Högkvist +358 400815206 on March 1 between 10-12 EET DIGITAL SOLUTIONS POSITIONS Robot Enthusiast As Robot Enthusiast, your responsibilities are identifying potential RPA cases in engineering and technical documentation domains and realising them as RPA flows and other related automations. To support the automations, you will be configuring also chat bots and developing special skills for them. You are expected to have skills and experience especially with UiPath, Microsoft Bot Framework and Microsoft Power Platform. For successful results in robotics, you should have analytical and systematic approach for development, be able to work directly with customers and be enthusiastic about supporting them with automations. 3D Specialist As 3D Specialist, you will be working with Citec Digital Twin platform, supporting and developing it in our daily operations. For this we are expecting you to be comfortable in software development (e.g., C#, TypeScript), especially on Azure (e.g., App Services, Functions, DevOps). Your software skills are combined with the knowledge of 3D realm, understanding the mechanics behind modelling and rendering, along with experience on common engineering-oriented 3D applications (e.g., Navisworks, Siemens NX) and web-based 3D technologies (e.g., WebGL), including virtual reality. 10- Software engineer trainee and software testing engineer trainee Your work consists of frontend-, backend-, or fullstack coding depending on your personal interests. Databases, Java, Redux and React are your day-to-day tools. If pure coding is not your cup of tea and you would like to mix things up a bit, your future career could be in our software testing! We use agile methods and CI modern testing tools are in the use every day. Choose between software engineer and software testing engineering based on your interests and plans for the future. To succeed you will need 1-3 years of studies in software engineering Programming as a hobby is an asset also! General interest in technology and various devices Open mind for traveling is also a positive asset A brisk attitude and enthusiasm to take on challenges makes you a potential Cimcorpe ... BACK |
Plusieurs offres d'emploi en Finland1-Mechanical Engineers / Supervisors, 3 paikkaa, Tekniq Oy, Vaasa: -Job Duties: - Evaluation of the Mechanical design, correction etc. - Installation Supervision, advising mechanical systems; piping, welding, supporting, steel structures, units, etc. their mechanical functioning - Testing the systems according to installation instructions and manufacturer's guidance. - Like flushing supervision, pressure tests, commissioning. - Reporting weekly to Section Manager/ Site Manager / Project Manager depending on the project organization. - Attending to meetings, briefing, planning, project meetings, safety meetings. - Following the safety rules of the installation, reporting if any risks. - Complete the project and given tasks - Maintaining professional and technical knowledge by following the development of the mechanical engineering. - Contributes to team effort by accomplishing related results as needed. -Mechanical Engineer Skills and Qualifications: - Engineering graduation - Min. 5 years installation experience - Knowledge of; mechanical systems, troubleshooting, testing, mechanical quality focus, analyzing information, reporting skills, team leading and negotiation skills. 2-Junior Automation and Instrumentation Engineers, 3 paikkaa, Tekniq Oy, Vaasa: -Job duties: - Plant automation and instrumentation testing and commissioning. - Performing installation supervision and commissioning works of various equipment's. - Troubleshooting and identifying failures, tuning and testing of installations according to instructions. - Continuous reporting to relevant stakeholders during the project. - Participate to meetings. -Skills and qualifications: - B.Sc. or M.Sc. in Engineering or studies still going on. - Experience of boiler plant electrical, instrumentation and automation systems. - Knowledge and experience of various PLC automation systems is an advantage. - Comprehensive ICT skills. - Some experience in the field. - Team player with a positive mind-set. - Self-driven attitude. - Good written and spoken English. - Technical problem-solving skills. - Willingness to travel 3-Pipewelders and Pipefitters, Barona Oy, Barona Teollisuus Oy, Raisio Are you an experienced pipewelder or pipefitter interested in a new work opportunity Then our job offer might be exactly what you are looking for. Our client in Naantali, Turku is searching for welders and fitters to complete its team. We are looking for both - pipewelders and pipefitters to assemble, weld, and maintain piping systems with high precision. You will be working indoor, on the factory site. Your main tasks will include welding/ fitting prefabricated piping elements. For welders, experience with welding turntable is needed. The factory works in 2 shifts and offers at least 40 hours/ week. Work starts as soon as we find suitable candidates. As a welder, we expect you to have: -MIG/MAG or TIG welding background of at least 3 years -Experience with welding turntable -Experience with reading welding markings -Valid welding certificate for pipes is an advantage -Ability to work independently and in the team -English or Russian or Finnish language on communicative level (B1) As a fitter, we expect from you the following: -Experience in this field for at least 3 years -Experience with reading piping isometrics -Ability to work independently and precisely -English or Russian or Finnish language on communicative level (B1) We offer: -Long-term employment -Competitive pay -Development opportunities in a friendly and cooperative environment -Accommodation, if needed -Assistance in English or Russian languages 4-Senior Advisor in health technology. Are you interested in working with ICT development, research and higher education in a multidisciplinary workplace? Are you a steely health technology professional who is excited about research and development operations taking place in the interface between higher education and working life Would you also like to teach and guide our students in your area of special expertise? If your answer is yes, this position might be for you. Your work as Senior Advisor in health technology involves research and development activities and working life collaboration in the field of health technology. In addition, you will get to apply your expertise in cooperation with the research in other fields. What do we expect from you? - An applicable higher education degree is required. An advanced degree is further appreciated. - We appreciate solid experience of software development related to health technology. - Data analytics skills are also appreciated. - Interest in machine learning and other areas of AI is valued. - We also value skills and interest in guiding our students. - We appreciate deep understanding of the cyber security challenges concerning health technology. - In addition, we value business life experience from tasks in which you have applied your expertise in research and development operations. - A definite requirement for the role is the capability to act in English in all your work assignments. - Command of programming either in general or field-specifically. What do we offer? The ICT unit at Turku University of Applied Sciences offers you a brilliant position in the interface of higher education and business life. With us, you will get an opportunity to work in a great work community in which we share information and experiences and collaborate multiprofessionally with our colleagues. You will get to participate in our research and development activities. In addition, you will get to develop your own expertise towards the very top of your field, as we design a professional development path for each of our staff members. The position is permanent, with a probationary period of 6 months applied. 5-PRODUCT DESIGNER At Lyyti, the customer comes first, and this is a rule we live by in all our activities. To offer an intuitive, modern and easy-to-use SaaS product, we develop our software continuously. Our Product Team consists of Developers, Designers, and Product Managers with a common goal of creating the best SaaS-platform for sales and marketing events. With the average NPS of 70, we know that our customers love our product as much as we do. Now we're looking for a Product Designer to strengthen our Design Team. Your key responsibilities are Designing, building and iterating Lyyti's mobile apps Continuing constructing and scaling our design system with the help of other Designers and Developers Directly interacting with our customers to validate your design solutions Delivering an outstanding, end-to-end user experience for all our customers As a Designer, you should have Proven experience in all phases of the design process including user research, copywriting, wireframing, prototyping, visual design, interaction design, and usability testing Passion about the entire product discovery process, conducting UX research and customer interviews, as well as collaborating closely with Product Managers to define the future of our product Understanding of iOS and Android design principles Experience in design tools such as Adobe XD, Sketch, Figma etc. Ability to collaborate with cross-functional team members proactively Fluency in English It would also be great if you have at least a basic understanding of front end development (no coding skills required) What we offer you A wide variety of different challenges to solve - an excellent opportunity to grow as a designer You will have a significant personal impact on our product Awesome colleagues and the chance to be part of the international Lyyti Family Modern tools and working environment Benefits like exercise and culture benefits, remote working opportunities, personal health insurance etc. 6-Chief Design Engineer, Process, Citec Oy Ab, Vaasa As a Process Engineering Chief Design Engineer, you would both lead and execute the process engineering scope in our multi-discipline projects, especially concentrating on mining and mineral or power plant engineering projects. In addition, you would be part of our sales process, giving technical support to the sales work towards our existing and potential customers. Your daily work would also include active communication with other disciplines and customers. We want to offer you an interesting and responsible position in our domestic and international projects, a flexible working environment, and the possibility to work with skilled colleagues in a friendly and open atmosphere. We offer you: An independent and wide role as technical expert and sub-project manager in international projects A network of skilled colleagues The possibility to develop new solutions and customer relationships through your technical competences Career possibilities within an international organization A flexible and agile working community Main tasks: Process engineering (e.g. piping and instrumentation diagrams, flow diagrams, process calculations, equipment specifications, process descriptions) Leading the process engineering in our multidiscipline projects Acting as the projects' main contact towards our customers for the process engineering scope Developing technically efficient engineering solutions and offering technical sales support 7- Chief Design Engineer, Electrical, Citec Oy Ab, Vaasa As a Chief Design Engineer, you are in charge for the technical project management and engineering of the Electrical and automation Design. In this role you would have a key role towards Citec's design team, other disciplines within the project and towards the customer. You are supporting sales projects, continuing with operative projects and leading your discipline from the concept, basic & extended basic and are coordinating and controlling the detail engineering for green field as well as brown field projects in international power plants and other Process plants. We offer you: - Independent and wide role as technical expert and as project manager for own discipline - Possibility to further develop your competence and technical solutions together with internal experts and with our valued customers - Career possibilities according to your own ambition towards for example project manager role Qualifications: - B.Sc. or M.Sc. in Electrical / Automation Engineering - Previous experience in Electrical / Automation design in industrial engineering projects - Deep knowledge and understanding of Plant & Process electrification, power generation and distribution systems in power and industrial process plant area. - Experience in modern 3D design tools - Good communication skills in English. Finnish and/or Swedish is considered as advantage 8-Chief Design Engineer to our office in Espoo, Turku or Vaasa. As a Process Engineering Chief Design Engineer, you would both lead and execute the process engineering scope in our multi-discipline projects, especially concentrating on mining and mineral or power plant engineering projects. In addition, you would be part of our sales process, giving technical support to the sales work towards our existing and potential customers. Your daily work would also include active communication with other disciplines and customers. We want to offer you an interesting and responsible position in our domestic and international projects, a flexible working environment, and the possibility to work with skilled colleagues in a friendly and open atmosphere. We offer you: An independent and wide role as technical expert and sub-project manager in international projects A network of skilled colleagues The possibility to develop new solutions and customer relationships through your technical competences Career possibilities within an international organization A flexible and agile working community Main tasks: Process engineering (e.g. piping and instrumentation diagrams, flow diagrams, process calculations, equipment specifications, process descriptions) Leading the process engineering in our multidiscipline projects Acting as the projects? main contact towards our customers for the process engineering scope Developing technically efficient engineering solutions and offering technical sales support We expect: M.Sc. or B.Sc. in process, mechanical or similar engineering Experience in process engineering for at least 3 years Good communication skills in English. Previous experience in mining and minerals or power plant engineering projects is seen as an advantage. 9- 20 NEW TECHNICAL DOCUMENTATION & DIGITAL SOLUTIONS FUTURE SPECIALISTS The positions are located in our Citec offices in Finland - Vaasa, Turku, Espoo, Tampere, Oulu or Pietarsaari. DOCUMENTATION MANAGEMENT POSITIONS Document Controller/Documentation Engineer We are looking for different profiles to complement our teams, no specific previous experience or education is required. We will give you induction to the tasks and tools as needed. A proactive teamworking attitude and an interest in making a career in handling documentation is what we are looking for! As a Document Controller or Documentation Engineer, you handle documentation and the main tasks are: verifying document contents, versions, type and location, ensuring metadata quality, sending and receiving documentation, establishing and following up required documentation and supporting in document handling. CONTENT CREATION POSITIONS Technical Documentation Specialist As a Technical Documentation Specialist, you can work with various tasks technical writing, information design, information architecture, visual design. We are looking for persons already having experience in technical documentation field with the above-mentioned tasks, but we are also interested in getting applications from persons who are taking their first steps in this area. In these roles you for example design, create and publish technical user documentation (e.g., operation manuals, maintenance manuals, user manuals) according to customer and end-user needs following the standards and guidelines. You will also be working with development activities related to our content creation services, documentation tools, processes and ways of working with others. For more information, please contact Head of Content Creation Sari Leinonen +358 504283 886 on March 3rd between 9-12 EET. LIFECYCLE MANAGEMENT POSITIONS Master Data Engineer As Master Data Engineer, you are working with lifecycle solutions with focus on data management, spare part - & maintenance information. Different PDM & PLM systems is your main working environment - with input from engineering and supplier?s documentation, you will enrich the data quality in the systems. You will have daily communication with our customer contacts and other Citec project teams. Main tasks: collect and publish master data, and coordination with external and internal stakeholders. Master Data Specialist As Master Data Specialist, you are working with lifecycle solutions with focus on data management, spare part - & maintenance information. We are expecting that you have +5 years of experiences of developing Lifecycle solutions, PDM & PLM systems and other IT solutions is your expertise area. For more information, kindly contact Head of Lifecycle Management Robin Högkvist +358 400815206 on March 1 between 10-12 EET DIGITAL SOLUTIONS POSITIONS Robot Enthusiast As Robot Enthusiast, your responsibilities are identifying potential RPA cases in engineering and technical documentation domains and realising them as RPA flows and other related automations. To support the automations, you will be configuring also chat bots and developing special skills for them. You are expected to have skills and experience especially with UiPath, Microsoft Bot Framework and Microsoft Power Platform. For successful results in robotics, you should have analytical and systematic approach for development, be able to work directly with customers and be enthusiastic about supporting them with automations. 3D Specialist As 3D Specialist, you will be working with Citec Digital Twin platform, supporting and developing it in our daily operations. For this we are expecting you to be comfortable in software development (e.g., C#, TypeScript), especially on Azure (e.g., App Services, Functions, DevOps). Your software skills are combined with the knowledge of 3D realm, understanding the mechanics behind modelling and rendering, along with experience on common engineering-oriented 3D applications (e.g., Navisworks, Siemens NX) and web-based 3D technologies (e.g., WebGL), including virtual reality. 10- Software engineer trainee and software testing engineer trainee Your work consists of frontend-, backend-, or fullstack coding depending on your personal interests. Databases, Java, Redux and React are your day-to-day tools. If pure coding is not your cup of tea and you would like to mix things up a bit, your future career could be in our software testing! We use agile methods and CI modern testing tools are in the use every day. Choose between software engineer and software testing engineering based on your interests and plans for the future. To succeed you will need 1-3 years of studies in software engineering Programming as a hobby is an asset also! General interest in technology and various devices Open mind for traveling is also a positive asset A brisk attitude and enthusiasm to take on challenges makes you a potential Cimcorpe ... BACK |
Plusieurs offres d'emploi en Finland1-Mechanical Engineers / Supervisors, 3 paikkaa, Tekniq Oy, Vaasa: -Job Duties: - Evaluation of the Mechanical design, correction etc. - Installation Supervision, advising mechanical systems; piping, welding, supporting, steel structures, units, etc. their mechanical functioning - Testing the systems according to installation instructions and manufacturer's guidance. - Like flushing supervision, pressure tests, commissioning. - Reporting weekly to Section Manager/ Site Manager / Project Manager depending on the project organization. - Attending to meetings, briefing, planning, project meetings, safety meetings. - Following the safety rules of the installation, reporting if any risks. - Complete the project and given tasks - Maintaining professional and technical knowledge by following the development of the mechanical engineering. - Contributes to team effort by accomplishing related results as needed. -Mechanical Engineer Skills and Qualifications: - Engineering graduation - Min. 5 years installation experience - Knowledge of; mechanical systems, troubleshooting, testing, mechanical quality focus, analyzing information, reporting skills, team leading and negotiation skills. 2-Junior Automation and Instrumentation Engineers, 3 paikkaa, Tekniq Oy, Vaasa: -Job duties: - Plant automation and instrumentation testing and commissioning. - Performing installation supervision and commissioning works of various equipment's. - Troubleshooting and identifying failures, tuning and testing of installations according to instructions. - Continuous reporting to relevant stakeholders during the project. - Participate to meetings. -Skills and qualifications: - B.Sc. or M.Sc. in Engineering or studies still going on. - Experience of boiler plant electrical, instrumentation and automation systems. - Knowledge and experience of various PLC automation systems is an advantage. - Comprehensive ICT skills. - Some experience in the field. - Team player with a positive mind-set. - Self-driven attitude. - Good written and spoken English. - Technical problem-solving skills. - Willingness to travel 3-Pipewelders and Pipefitters, Barona Oy, Barona Teollisuus Oy, Raisio Are you an experienced pipewelder or pipefitter interested in a new work opportunity Then our job offer might be exactly what you are looking for. Our client in Naantali, Turku is searching for welders and fitters to complete its team. We are looking for both - pipewelders and pipefitters to assemble, weld, and maintain piping systems with high precision. You will be working indoor, on the factory site. Your main tasks will include welding/ fitting prefabricated piping elements. For welders, experience with welding turntable is needed. The factory works in 2 shifts and offers at least 40 hours/ week. Work starts as soon as we find suitable candidates. As a welder, we expect you to have: -MIG/MAG or TIG welding background of at least 3 years -Experience with welding turntable -Experience with reading welding markings -Valid welding certificate for pipes is an advantage -Ability to work independently and in the team -English or Russian or Finnish language on communicative level (B1) As a fitter, we expect from you the following: -Experience in this field for at least 3 years -Experience with reading piping isometrics -Ability to work independently and precisely -English or Russian or Finnish language on communicative level (B1) We offer: -Long-term employment -Competitive pay -Development opportunities in a friendly and cooperative environment -Accommodation, if needed -Assistance in English or Russian languages 4-Senior Advisor in health technology. Are you interested in working with ICT development, research and higher education in a multidisciplinary workplace? Are you a steely health technology professional who is excited about research and development operations taking place in the interface between higher education and working life Would you also like to teach and guide our students in your area of special expertise? If your answer is yes, this position might be for you. Your work as Senior Advisor in health technology involves research and development activities and working life collaboration in the field of health technology. In addition, you will get to apply your expertise in cooperation with the research in other fields. What do we expect from you? - An applicable higher education degree is required. An advanced degree is further appreciated. - We appreciate solid experience of software development related to health technology. - Data analytics skills are also appreciated. - Interest in machine learning and other areas of AI is valued. - We also value skills and interest in guiding our students. - We appreciate deep understanding of the cyber security challenges concerning health technology. - In addition, we value business life experience from tasks in which you have applied your expertise in research and development operations. - A definite requirement for the role is the capability to act in English in all your work assignments. - Command of programming either in general or field-specifically. What do we offer? The ICT unit at Turku University of Applied Sciences offers you a brilliant position in the interface of higher education and business life. With us, you will get an opportunity to work in a great work community in which we share information and experiences and collaborate multiprofessionally with our colleagues. You will get to participate in our research and development activities. In addition, you will get to develop your own expertise towards the very top of your field, as we design a professional development path for each of our staff members. The position is permanent, with a probationary period of 6 months applied. 5-PRODUCT DESIGNER At Lyyti, the customer comes first, and this is a rule we live by in all our activities. To offer an intuitive, modern and easy-to-use SaaS product, we develop our software continuously. Our Product Team consists of Developers, Designers, and Product Managers with a common goal of creating the best SaaS-platform for sales and marketing events. With the average NPS of 70, we know that our customers love our product as much as we do. Now we're looking for a Product Designer to strengthen our Design Team. Your key responsibilities are Designing, building and iterating Lyyti's mobile apps Continuing constructing and scaling our design system with the help of other Designers and Developers Directly interacting with our customers to validate your design solutions Delivering an outstanding, end-to-end user experience for all our customers As a Designer, you should have Proven experience in all phases of the design process including user research, copywriting, wireframing, prototyping, visual design, interaction design, and usability testing Passion about the entire product discovery process, conducting UX research and customer interviews, as well as collaborating closely with Product Managers to define the future of our product Understanding of iOS and Android design principles Experience in design tools such as Adobe XD, Sketch, Figma etc. Ability to collaborate with cross-functional team members proactively Fluency in English It would also be great if you have at least a basic understanding of front end development (no coding skills required) What we offer you A wide variety of different challenges to solve - an excellent opportunity to grow as a designer You will have a significant personal impact on our product Awesome colleagues and the chance to be part of the international Lyyti Family Modern tools and working environment Benefits like exercise and culture benefits, remote working opportunities, personal health insurance etc. 6-Chief Design Engineer, Process, Citec Oy Ab, Vaasa As a Process Engineering Chief Design Engineer, you would both lead and execute the process engineering scope in our multi-discipline projects, especially concentrating on mining and mineral or power plant engineering projects. In addition, you would be part of our sales process, giving technical support to the sales work towards our existing and potential customers. Your daily work would also include active communication with other disciplines and customers. We want to offer you an interesting and responsible position in our domestic and international projects, a flexible working environment, and the possibility to work with skilled colleagues in a friendly and open atmosphere. We offer you: An independent and wide role as technical expert and sub-project manager in international projects A network of skilled colleagues The possibility to develop new solutions and customer relationships through your technical competences Career possibilities within an international organization A flexible and agile working community Main tasks: Process engineering (e.g. piping and instrumentation diagrams, flow diagrams, process calculations, equipment specifications, process descriptions) Leading the process engineering in our multidiscipline projects Acting as the projects' main contact towards our customers for the process engineering scope Developing technically efficient engineering solutions and offering technical sales support 7- Chief Design Engineer, Electrical, Citec Oy Ab, Vaasa As a Chief Design Engineer, you are in charge for the technical project management and engineering of the Electrical and automation Design. In this role you would have a key role towards Citec's design team, other disciplines within the project and towards the customer. You are supporting sales projects, continuing with operative projects and leading your discipline from the concept, basic & extended basic and are coordinating and controlling the detail engineering for green field as well as brown field projects in international power plants and other Process plants. We offer you: - Independent and wide role as technical expert and as project manager for own discipline - Possibility to further develop your competence and technical solutions together with internal experts and with our valued customers - Career possibilities according to your own ambition towards for example project manager role Qualifications: - B.Sc. or M.Sc. in Electrical / Automation Engineering - Previous experience in Electrical / Automation design in industrial engineering projects - Deep knowledge and understanding of Plant & Process electrification, power generation and distribution systems in power and industrial process plant area. - Experience in modern 3D design tools - Good communication skills in English. Finnish and/or Swedish is considered as advantage 8-Chief Design Engineer to our office in Espoo, Turku or Vaasa. As a Process Engineering Chief Design Engineer, you would both lead and execute the process engineering scope in our multi-discipline projects, especially concentrating on mining and mineral or power plant engineering projects. In addition, you would be part of our sales process, giving technical support to the sales work towards our existing and potential customers. Your daily work would also include active communication with other disciplines and customers. We want to offer you an interesting and responsible position in our domestic and international projects, a flexible working environment, and the possibility to work with skilled colleagues in a friendly and open atmosphere. We offer you: An independent and wide role as technical expert and sub-project manager in international projects A network of skilled colleagues The possibility to develop new solutions and customer relationships through your technical competences Career possibilities within an international organization A flexible and agile working community Main tasks: Process engineering (e.g. piping and instrumentation diagrams, flow diagrams, process calculations, equipment specifications, process descriptions) Leading the process engineering in our multidiscipline projects Acting as the projects? main contact towards our customers for the process engineering scope Developing technically efficient engineering solutions and offering technical sales support We expect: M.Sc. or B.Sc. in process, mechanical or similar engineering Experience in process engineering for at least 3 years Good communication skills in English. Previous experience in mining and minerals or power plant engineering projects is seen as an advantage. 9- 20 NEW TECHNICAL DOCUMENTATION & DIGITAL SOLUTIONS FUTURE SPECIALISTS The positions are located in our Citec offices in Finland - Vaasa, Turku, Espoo, Tampere, Oulu or Pietarsaari. DOCUMENTATION MANAGEMENT POSITIONS Document Controller/Documentation Engineer We are looking for different profiles to complement our teams, no specific previous experience or education is required. We will give you induction to the tasks and tools as needed. A proactive teamworking attitude and an interest in making a career in handling documentation is what we are looking for! As a Document Controller or Documentation Engineer, you handle documentation and the main tasks are: verifying document contents, versions, type and location, ensuring metadata quality, sending and receiving documentation, establishing and following up required documentation and supporting in document handling. CONTENT CREATION POSITIONS Technical Documentation Specialist As a Technical Documentation Specialist, you can work with various tasks technical writing, information design, information architecture, visual design. We are looking for persons already having experience in technical documentation field with the above-mentioned tasks, but we are also interested in getting applications from persons who are taking their first steps in this area. In these roles you for example design, create and publish technical user documentation (e.g., operation manuals, maintenance manuals, user manuals) according to customer and end-user needs following the standards and guidelines. You will also be working with development activities related to our content creation services, documentation tools, processes and ways of working with others. For more information, please contact Head of Content Creation Sari Leinonen +358 504283 886 on March 3rd between 9-12 EET. LIFECYCLE MANAGEMENT POSITIONS Master Data Engineer As Master Data Engineer, you are working with lifecycle solutions with focus on data management, spare part - & maintenance information. Different PDM & PLM systems is your main working environment - with input from engineering and supplier?s documentation, you will enrich the data quality in the systems. You will have daily communication with our customer contacts and other Citec project teams. Main tasks: collect and publish master data, and coordination with external and internal stakeholders. Master Data Specialist As Master Data Specialist, you are working with lifecycle solutions with focus on data management, spare part - & maintenance information. We are expecting that you have +5 years of experiences of developing Lifecycle solutions, PDM & PLM systems and other IT solutions is your expertise area. For more information, kindly contact Head of Lifecycle Management Robin Högkvist +358 400815206 on March 1 between 10-12 EET DIGITAL SOLUTIONS POSITIONS Robot Enthusiast As Robot Enthusiast, your responsibilities are identifying potential RPA cases in engineering and technical documentation domains and realising them as RPA flows and other related automations. To support the automations, you will be configuring also chat bots and developing special skills for them. You are expected to have skills and experience especially with UiPath, Microsoft Bot Framework and Microsoft Power Platform. For successful results in robotics, you should have analytical and systematic approach for development, be able to work directly with customers and be enthusiastic about supporting them with automations. 3D Specialist As 3D Specialist, you will be working with Citec Digital Twin platform, supporting and developing it in our daily operations. For this we are expecting you to be comfortable in software development (e.g., C#, TypeScript), especially on Azure (e.g., App Services, Functions, DevOps). Your software skills are combined with the knowledge of 3D realm, understanding the mechanics behind modelling and rendering, along with experience on common engineering-oriented 3D applications (e.g., Navisworks, Siemens NX) and web-based 3D technologies (e.g., WebGL), including virtual reality. 10- Software engineer trainee and software testing engineer trainee Your work consists of frontend-, backend-, or fullstack coding depending on your personal interests. Databases, Java, Redux and React are your day-to-day tools. If pure coding is not your cup of tea and you would like to mix things up a bit, your future career could be in our software testing! We use agile methods and CI modern testing tools are in the use every day. Choose between software engineer and software testing engineering based on your interests and plans for the future. To succeed you will need 1-3 years of studies in software engineering Programming as a hobby is an asset also! General interest in technology and various devices Open mind for traveling is also a positive asset A brisk attitude and enthusiasm to take on challenges makes you a potential Cimcorpe ... BACK |
| PAGES [ la plus récente: 4 ] [ archives: 3 - 2 - 1 - ] |
|---|
Powered by MMS - © 2019 EUROTEAM |
|---|